P045V82 — Bosch MS6.2 ECU, Scania L124
Original (stock) ECU file for the Scania L124 — 11.7L 420HP, Bosch MS6.2 controller, software P045V82. Unmodified factory read, usually within 3 hours after we confirm your ECU numbers.
Identification
| Vehicle | Scania L124 |
|---|---|
| Engine | 11.7L 420HP |
| Engine code | DC1201-L01 |
| ECU | Bosch MS6.2 |
| Software number | P045V82 |
Compatibility
The same Bosch MS6.2 with part number P045V82 is also fitted to these vehicles / engines in our archive:
| Vehicle | Engine | Software |
|---|---|---|
| Scania L124 (this page) | 11.7L 420HP · DC1201-L01 | P045V82 |
| Scania BUS | 11.7L 420HP · DSC1205-L01 | P045V82 |
| Scania R114 | 10.6L 380HP · DC1104-L01 | P045V82 |
| Scania R124 | 11.7L 420HP · DC1201-L01 | P045V82 |
| Scania R164 | 15.6L 580HP · DC1601-L01 | P045V82 |
| Scania R164 | 15.6L 480HP · DC1602-L01 | P045V82 |
| Scania R184 | 12000 480HP · DC1602-L01 | P045V82 |
| Scania R380 | 106 380HP · DC 11 04 - L01 | P045V82 |
| Scania R380 | 12000 380HP · DC1104-L01 | P045V82 |
| Scania T124 | 11.7L 420HP | P045V82 |
Cross references
Other hardware carrying software P045V82:
What you get
A full, unmodified read of the Bosch MS6.2 as it left the factory — the binary file produced by the original reading tool, no checksum or map changes. Use it to restore a stock calibration after a failed flash or a bad tune, or as the reference file for a tuning job. One read is stored for this identification.
| Archive reference | Driver | Damos / A2L |
|---|---|---|
| SCA_0479 | SCA_0479 | — |
Delivery: released to your account and announced by email usually within 3 hours, within 24 hours on business days, once we confirm the read matches the numbers on this page.
Questions about this file
Is this original file compatible with my Scania L124?
Compare the software number (P045V82) with the identification your tool reads from the ECU. If your software number differs, tell us — we check whether a matching original exists. Bosch MS6.x controllers (MAN, Scania older generations) are identified by hardware and software numbers on the label; reads are normally done in bench/BDM mode.
What exactly do I receive when I buy the Bosch MS6.2 original for €25?
An unmodified factory read of the Bosch MS6.2 (SW P045V82) as stored in our archive — a binary file in the format produced by the original reading tool. No modifications, no checksum changes: it is meant to restore the ECU to its stock calibration or to serve as a reference for a tuning job.
How and when is the file delivered?
After payment we confirm the read matches the numbers on this page and release it to your account, with an email notification — usually within 3 hours, within 24 hours on business days. If your ECU reports different numbers, tell us with the order and we look for the right file before delivering anything.
Can you also tune this Bosch MS6.2 or remove EGR / AdBlue / DPF?
Yes — upload your own read through the tuning service and choose the modifications; every tuning job is quoted individually before you pay. The original on this page is useful as a backup before any modification is flashed.