0281020048 — Bosch EDC7UC31 ECU, New Holland T8
Original (stock) ECU file for the New Holland T8 — 8700 375HP, Bosch EDC7UC31 controller, hardware 0281020048, software 1037380685. Unmodified factory read, usually within 3 hours after we confirm your ECU numbers.
Identification
| Vehicle | New Holland T8 |
|---|---|
| Engine | 8700 375HP |
| ECU | Bosch EDC7UC31 |
| Hardware number | 0281020048 |
| Software number | 1037380685 |
Compatibility
The same Bosch EDC7UC31 with part number 0281020048 is also fitted to these vehicles / engines in our archive:
| Vehicle | Engine | Software |
|---|---|---|
| New Holland T8 (this page) | 8700 375HP | 1037380685 |
| DAF LF | 5900 280HP | 1037378083 |
| Ford Trucks CARGO | 10300 420HP · FPT | 1037380712 |
| Ford Trucks CARGO | 10300 450HP | 1039S56197 |
| New Holland CR | 10300 490HP | 1037374255 |
| New Holland CR | 12800 455HP | 1037378050 |
| New Holland CR | 6000 380HP | 1037380638 |
| New Holland CX | 8700 367HP | 1037374255 |
| New Holland T6 | 4500 115HP | 1037380696 |
| New Holland T7 | 6700 205HP | 1037374255 |
| New Holland T7 | 6700 175HP · F4DFE613B_A004 | 1037380696 |
| New Holland T7 | 6700 235HP · F4DFE613B_A004 | 1037374255 |
| New Holland T8 | 8700 270HP | 1037374255 |
| New Holland T8 | 8700 293HP | 1037380677 |
| New Holland T8 | 8700 389HP · F2CFE613C_A000 | 1037380628 |
| New Holland T9 | 12700 526HP · FPT Cursor 13 | 1037374255 |
| New Holland TS | 4500 160HP | 1037374255 |
Cross references
Other software levels recorded on hardware 0281020048:
Other hardware carrying software 1037380685:
What you get
A full, unmodified read of the Bosch EDC7UC31 as it left the factory — the binary file produced by the original reading tool, no checksum or map changes. Use it to restore a stock calibration after a failed flash or a bad tune, or as the reference file for a tuning job. One read is stored for this identification.
| Archive reference | Driver | Damos / A2L |
|---|---|---|
| H048_685 | H048_685 | P340VE02 |
Delivery: released to your account and announced by email usually within 3 hours, within 24 hours on business days, once we confirm the read matches the numbers on this page.
Questions about this file
Is this original file compatible with my New Holland T8?
Compare the hardware number (0281020048) and the software number (1037380685) with the identification your tool reads from the ECU. The software number must match; a different hardware revision usually means a different file. Bosch EDC7 controllers (EDC7C32, EDC7UC31, EDC7C1…) are identified by a 0281 hardware number and a 1037 software number printed on the label and readable by OBD.
What exactly do I receive when I buy the Bosch EDC7UC31 original for €25?
An unmodified factory read of the Bosch EDC7UC31 (HW 0281020048, SW 1037380685) as stored in our archive — a binary file in the format produced by the original reading tool. No modifications, no checksum changes: it is meant to restore the ECU to its stock calibration or to serve as a reference for a tuning job.
How and when is the file delivered?
After payment we confirm the read matches the numbers on this page and release it to your account, with an email notification — usually within 3 hours, within 24 hours on business days. If your ECU reports different numbers, tell us with the order and we look for the right file before delivering anything.
Can you also tune this Bosch EDC7UC31 or remove EGR / AdBlue / DPF?
Yes — upload your own read through the tuning service and choose the modifications; every tuning job is quoted individually before you pay. The original on this page is useful as a backup before any modification is flashed.