1037378081 — Bosch EDC7UC31 ECU, Daewoo NOVUS
Original (stock) ECU file for the Daewoo NOVUS — 5900 251HP, Bosch EDC7UC31 controller, software 1037378081. Unmodified factory read, usually within 3 hours after we confirm your ECU numbers.
Identification
| Vehicle | Daewoo NOVUS |
|---|---|
| Engine | 5900 251HP |
| ECU | Bosch EDC7UC31 |
| Software number | 1037378081 |
Compatibility
The same Bosch EDC7UC31 with part number 1037378081 is also fitted to these vehicles / engines in our archive:
| Vehicle | Engine | Software |
|---|---|---|
| Daewoo NOVUS (this page) | 5900 251HP | 1037378081 |
| New Holland 9060 | 6000 353HP | 1037378081 |
| New Holland CR | 8700 422HP | 1037378081 |
| New Holland T5 | 6800 207HP | 1037378081 |
Cross references
Other hardware carrying software 1037378081:
What you get
A full, unmodified read of the Bosch EDC7UC31 as it left the factory — the binary file produced by the original reading tool, no checksum or map changes. Use it to restore a stock calibration after a failed flash or a bad tune, or as the reference file for a tuning job. One read is stored for this identification.
| Archive reference | Driver | Damos / A2L |
|---|---|---|
| DAE_0D29 | DAE_0D29 | P340V91.0 |
Delivery: released to your account and announced by email usually within 3 hours, within 24 hours on business days, once we confirm the read matches the numbers on this page.
Questions about this file
Is this original file compatible with my Daewoo NOVUS?
Compare the software number (1037378081) with the identification your tool reads from the ECU. If your software number differs, tell us — we check whether a matching original exists. Bosch EDC7 controllers (EDC7C32, EDC7UC31, EDC7C1…) are identified by a 0281 hardware number and a 1037 software number printed on the label and readable by OBD.
What exactly do I receive when I buy the Bosch EDC7UC31 original for €25?
An unmodified factory read of the Bosch EDC7UC31 (SW 1037378081) as stored in our archive — a binary file in the format produced by the original reading tool. No modifications, no checksum changes: it is meant to restore the ECU to its stock calibration or to serve as a reference for a tuning job.
How and when is the file delivered?
After payment we confirm the read matches the numbers on this page and release it to your account, with an email notification — usually within 3 hours, within 24 hours on business days. If your ECU reports different numbers, tell us with the order and we look for the right file before delivering anything.
Can you also tune this Bosch EDC7UC31 or remove EGR / AdBlue / DPF?
Yes — upload your own read through the tuning service and choose the modifications; every tuning job is quoted individually before you pay. The original on this page is useful as a backup before any modification is flashed.