0281S01362 — Bosch EDC7C32 ECU, MAN TGA
Original (stock) ECU file for the MAN TGA — 10600 440HP, Bosch EDC7C32 controller, hardware 0281S01362, software 1037381349. Unmodified factory read, usually within 3 hours after we confirm your ECU numbers.
Identification
| Vehicle | MAN TGA |
|---|---|
| Engine | 10600 440HP |
| Engine code | D2066 LF21 |
| ECU | Bosch EDC7C32 |
| Hardware number | 0281S01362 |
| Software number | 1037381349 |
Compatibility
The same Bosch EDC7C32 with part number 0281S01362 is also fitted to these vehicles / engines in our archive:
Cross references
Other software levels recorded on hardware 0281S01362:
Other hardware carrying software 1037381349:
What you get
A full, unmodified read of the Bosch EDC7C32 as it left the factory — the binary file produced by the original reading tool, no checksum or map changes. Use it to restore a stock calibration after a failed flash or a bad tune, or as the reference file for a tuning job. One read is stored for this identification.
| Archive reference | Driver | Damos / A2L |
|---|---|---|
| MAN_7BEA | MAN_7BEA | — |
Delivery: released to your account and announced by email usually within 3 hours, within 24 hours on business days, once we confirm the read matches the numbers on this page.
Questions about this file
Is this original file compatible with my MAN TGA?
Compare the hardware number (0281S01362) and the software number (1037381349) with the identification your tool reads from the ECU. The software number must match; a different hardware revision usually means a different file. Bosch EDC7 controllers (EDC7C32, EDC7UC31, EDC7C1…) are identified by a 0281 hardware number and a 1037 software number printed on the label and readable by OBD.
What exactly do I receive when I buy the Bosch EDC7C32 original for €25?
An unmodified factory read of the Bosch EDC7C32 (HW 0281S01362, SW 1037381349) as stored in our archive — a binary file in the format produced by the original reading tool. No modifications, no checksum changes: it is meant to restore the ECU to its stock calibration or to serve as a reference for a tuning job.
How and when is the file delivered?
After payment we confirm the read matches the numbers on this page and release it to your account, with an email notification — usually within 3 hours, within 24 hours on business days. If your ECU reports different numbers, tell us with the order and we look for the right file before delivering anything.
Can you also tune this Bosch EDC7C32 or remove EGR / AdBlue / DPF?
Yes — upload your own read through the tuning service and choose the modifications; every tuning job is quoted individually before you pay. The original on this page is useful as a backup before any modification is flashed.