0281020273 — Bosch EDC17CV42 ECU, MAN TGA
Original (stock) ECU file for the MAN TGA — 12000 440HP, Bosch EDC17CV42 controller, hardware 0281020273, software 1037541468. Unmodified factory read, usually within 3 hours after we confirm your ECU numbers.
Identification
| Vehicle | MAN TGA |
|---|---|
| Engine | 12000 440HP |
| ECU | Bosch EDC17CV42 |
| Hardware number | 0281020273 |
| Software number | 1037541468 |
| Software upgrade | P_700_5_5_1.hex |
Compatibility
The same Bosch EDC17CV42 with part number 0281020273 is also fitted to these vehicles / engines in our archive:
Cross references
Other software levels recorded on hardware 0281020273:
Other hardware carrying software 1037541468:
What you get
A full, unmodified read of the Bosch EDC17CV42 as it left the factory — the binary file produced by the original reading tool, no checksum or map changes. Use it to restore a stock calibration after a failed flash or a bad tune, or as the reference file for a tuning job. One read is stored for this identification.
| Archive reference | Driver | Damos / A2L |
|---|---|---|
| MAN_70EA | MAN_70EA | — |
Delivery: released to your account and announced by email usually within 3 hours, within 24 hours on business days, once we confirm the read matches the numbers on this page.
Questions about this file
Is this original file compatible with my MAN TGA?
Compare the hardware number (0281020273) and the software number (1037541468) with the identification your tool reads from the ECU. The software number must match; a different hardware revision usually means a different file. Bosch EDC17 controllers are identified by a 0281 hardware number and a 1037 software number. Many EDC17 variants on trucks are read in boot/bench mode rather than OBD, so make sure the tool identification matches these numbers before flashing.
What exactly do I receive when I buy the Bosch EDC17CV42 original for €25?
An unmodified factory read of the Bosch EDC17CV42 (HW 0281020273, SW 1037541468, upgrade P_700_5_5_1.hex) as stored in our archive — a binary file in the format produced by the original reading tool. No modifications, no checksum changes: it is meant to restore the ECU to its stock calibration or to serve as a reference for a tuning job.
How and when is the file delivered?
After payment we confirm the read matches the numbers on this page and release it to your account, with an email notification — usually within 3 hours, within 24 hours on business days. If your ECU reports different numbers, tell us with the order and we look for the right file before delivering anything.
Can you also tune this Bosch EDC17CV42 or remove EGR / AdBlue / DPF?
Yes — upload your own read through the tuning service and choose the modifications; every tuning job is quoted individually before you pay. The original on this page is useful as a backup before any modification is flashed.