60100008P05 — TRW EMS2.2 ECU, Volvo Trucks FE
Original (stock) ECU file for the Volvo Trucks FE — 3800 300HP, TRW EMS2.2 controller, hardware 60100008P05, software 60101148P01. Unmodified factory read, usually within 3 hours after we confirm your ECU numbers.
Identification
| Vehicle | Volvo Trucks FE |
|---|---|
| Engine | 3800 300HP |
| ECU | TRW EMS2.2 |
| Hardware number | 60100008P05 |
| Software number | 60101148P01 |
| Software upgrade | 60103683P01 |
Compatibility
The same TRW EMS2.2 with part number 60100008P05 is also fitted to these vehicles / engines in our archive:
| Vehicle | Engine | Software |
|---|---|---|
| Volvo Trucks FE (this page) | 3800 300HP | 60101148P01 |
| Renault Trucks PREMIUM | 11000 410HP | 60101159P01 |
| Volvo CE L70G | 5700 171HP | 60101136P01 |
| Volvo Trucks FE | 3800 300HP | 60101130P01 |
| Volvo Trucks FL | 7200 290HP | 60101130P01 |
Cross references
Other software levels recorded on hardware 60100008P05:
Other hardware carrying software 60101148P01:
What you get
A full, unmodified read of the TRW EMS2.2 as it left the factory — the binary file produced by the original reading tool, no checksum or map changes. Use it to restore a stock calibration after a failed flash or a bad tune, or as the reference file for a tuning job. One read is stored for this identification.
| Archive reference | Driver | Damos / A2L |
|---|---|---|
| V38_E3E0 | V38_E3E0 | 8P0126363031 |
Delivery: released to your account and announced by email usually within 3 hours, within 24 hours on business days, once we confirm the read matches the numbers on this page.
Questions about this file
Is this original file compatible with my Volvo Trucks FE?
Compare the hardware number (60100008P05) and the software number (60101148P01) with the identification your tool reads from the ECU. The software number must match; a different hardware revision usually means a different file. TRW EMS2.x controllers (Volvo / Renault Trucks) use P-numbers: a hardware number such as 21323765P04 and a software number such as 22929395P01. The software upgrade number is the calibration actually loaded.
What exactly do I receive when I buy the TRW EMS2.2 original for €25?
An unmodified factory read of the TRW EMS2.2 (HW 60100008P05, SW 60101148P01, upgrade 60103683P01) as stored in our archive — a binary file in the format produced by the original reading tool. No modifications, no checksum changes: it is meant to restore the ECU to its stock calibration or to serve as a reference for a tuning job.
How and when is the file delivered?
After payment we confirm the read matches the numbers on this page and release it to your account, with an email notification — usually within 3 hours, within 24 hours on business days. If your ECU reports different numbers, tell us with the order and we look for the right file before delivering anything.
Can you also tune this TRW EMS2.2 or remove EGR / AdBlue / DPF?
Yes — upload your own read through the tuning service and choose the modifications; every tuning job is quoted individually before you pay. The original on this page is useful as a backup before any modification is flashed.