20995620P06 — TRW EMS2 ECU, Renault Trucks MAGNUM

Original (stock) ECU file for the Renault Trucks MAGNUM — 13000 460HP, TRW EMS2 controller, hardware 20995620P06. Unmodified factory read, usually within 3 hours after we confirm your ECU numbers.

Part no. 20995620P06 TRW EMS2 1 read in archive

Identification

VehicleRenault Trucks MAGNUM
Engine13000 460HP
ECUTRW EMS2
Hardware number20995620P06

Compatibility

The same TRW EMS2 with part number 20995620P06 is also fitted to these vehicles / engines in our archive:

VehicleEngineSoftware
Renault Trucks MAGNUM (this page)13000 460HP
Renault Trucks PREMIUM11000 430HP
Volvo Trucks FH1313000 460HP22190319P01
Volvo Trucks FH1312800 540HP22343920P01
Volvo Trucks FH1313000 540HP21762056P01

Cross references

Other software levels recorded on hardware 20995620P06:

What you get

A full, unmodified read of the TRW EMS2 as it left the factory — the binary file produced by the original reading tool, no checksum or map changes. Use it to restore a stock calibration after a failed flash or a bad tune, or as the reference file for a tuning job. One read is stored for this identification.

Archive referenceDriverDamos / A2L
REN_46B9REN_46B9

Delivery: released to your account and announced by email usually within 3 hours, within 24 hours on business days, once we confirm the read matches the numbers on this page.

Questions about this file

Is this original file compatible with my Renault Trucks MAGNUM?

Compare the hardware number (20995620P06) with the identification your tool reads from the ECU, then send us the software number you read so we confirm the exact calibration before delivery. TRW EMS2.x controllers (Volvo / Renault Trucks) use P-numbers: a hardware number such as 21323765P04 and a software number such as 22929395P01. The software upgrade number is the calibration actually loaded.

What exactly do I receive when I buy the TRW EMS2 original for €25?

An unmodified factory read of the TRW EMS2 (HW 20995620P06) as stored in our archive — a binary file in the format produced by the original reading tool. No modifications, no checksum changes: it is meant to restore the ECU to its stock calibration or to serve as a reference for a tuning job.

How and when is the file delivered?

After payment we confirm the read matches the numbers on this page and release it to your account, with an email notification — usually within 3 hours, within 24 hours on business days. If your ECU reports different numbers, tell us with the order and we look for the right file before delivering anything.

Can you also tune this TRW EMS2 or remove EGR / AdBlue / DPF?

Yes — upload your own read through the tuning service and choose the modifications; every tuning job is quoted individually before you pay. The original on this page is useful as a backup before any modification is flashed.