06A-28 — Temic OM924LA ECU, Mercedes-Benz BUS
Original (stock) ECU file for the Mercedes-Benz BUS — 4800 177HP, Temic OM924LA controller, software 06A-28. Unmodified factory read, usually within 3 hours after we confirm your ECU numbers.
Identification
| Vehicle | Mercedes-Benz BUS |
|---|---|
| Engine | 4800 177HP |
| ECU | Temic OM924LA |
| Software number | 06A-28 |
Compatibility
The same Temic OM924LA with part number 06A-28 is also fitted to these vehicles / engines in our archive:
| Vehicle | Engine | Software |
|---|---|---|
| Mercedes-Benz BUS (this page) | 4800 177HP | 06A-28 |
| Mercedes-Benz ATEGO | 1222 218HP · OM924LA | — |
Cross references
Other hardware carrying software 06A-28:
What you get
A full, unmodified read of the Temic OM924LA as it left the factory — the binary file produced by the original reading tool, no checksum or map changes. Use it to restore a stock calibration after a failed flash or a bad tune, or as the reference file for a tuning job. 3 reads are stored for this identification; you receive the one matching your ECU identification.
| Archive reference | Driver | Damos / A2L |
|---|---|---|
| M48_3D72 | M48_3D72 | — |
| M48_FD46 | M48_FD46 | — |
| MER_FD7D | MER_FD7D | — |
Delivery: released to your account and announced by email usually within 3 hours, within 24 hours on business days, once we confirm the read matches the numbers on this page.
Questions about this file
Is this original file compatible with my Mercedes-Benz BUS?
Compare the software number (06A-28) with the identification your tool reads from the ECU. If your software number differs, tell us — we check whether a matching original exists. Temic / Continental MR, MCM, ACM and CPC controllers (Mercedes-Benz) use A-part numbers such as A0024461235ZGS002; the ZGS suffix is the release state of that part.
What exactly do I receive when I buy the Temic OM924LA original for €25?
An unmodified factory read of the Temic OM924LA (SW 06A-28) as stored in our archive — a binary file in the format produced by the original reading tool, chosen among the 3 reads listed on this page after we match your identification. No modifications, no checksum changes: it is meant to restore the ECU to its stock calibration or to serve as a reference for a tuning job.
How and when is the file delivered?
After payment we confirm the read matches the numbers on this page and release it to your account, with an email notification — usually within 3 hours, within 24 hours on business days. If your ECU reports different numbers, tell us with the order and we look for the right file before delivering anything.
Can you also tune this Temic OM924LA or remove EGR / AdBlue / DPF?
Yes — upload your own read through the tuning service and choose the modifications; every tuning job is quoted individually before you pay. The original on this page is useful as a backup before any modification is flashed.