0DL300047G — Temic DQ500 ECU, Volkswagen TIGUAN
Original (stock) ECU file for the Volkswagen TIGUAN — 2000 220HP, Temic DQ500 controller, hardware 0DL300047G, software 2620. Unmodified factory read, usually within 3 hours after we confirm your ECU numbers.
Identification
| Vehicle | Volkswagen TIGUAN |
|---|---|
| Engine | 2000 220HP |
| ECU | Temic DQ500 |
| Hardware number | 0DL300047G |
| Software number | 2620 |
| Software upgrade | 0DL300047G_2620 |
| Calibration | 0DL300047G_2620 |
Compatibility
In our archive this exact read is recorded for the Volkswagen TIGUAN with the 2000 220HP engine. We hold 3 other reads for this model — see “Related files” below. The Temic DQ500 controller appears 2 times across the catalogue.
What you get
A full, unmodified read of the Temic DQ500 as it left the factory — the binary file produced by the original reading tool, no checksum or map changes. Use it to restore a stock calibration after a failed flash or a bad tune, or as the reference file for a tuning job. One read is stored for this identification.
| Archive reference | Driver | Damos / A2L |
|---|---|---|
| BMW_EEC4 | BMW_EEC4 | — |
Delivery: released to your account and announced by email usually within 3 hours, within 24 hours on business days, once we confirm the read matches the numbers on this page.
Questions about this file
Is this original file compatible with my Volkswagen TIGUAN?
Compare the hardware number (0DL300047G) and the software number (2620) with the identification your tool reads from the ECU. The software number must match; a different hardware revision usually means a different file. Temic / Continental MR, MCM, ACM and CPC controllers (Mercedes-Benz) use A-part numbers such as A0024461235ZGS002; the ZGS suffix is the release state of that part.
What exactly do I receive when I buy the Temic DQ500 original for €25?
An unmodified factory read of the Temic DQ500 (HW 0DL300047G, SW 2620, upgrade 0DL300047G_2620) as stored in our archive — a binary file in the format produced by the original reading tool. No modifications, no checksum changes: it is meant to restore the ECU to its stock calibration or to serve as a reference for a tuning job.
How and when is the file delivered?
After payment we confirm the read matches the numbers on this page and release it to your account, with an email notification — usually within 3 hours, within 24 hours on business days. If your ECU reports different numbers, tell us with the order and we look for the right file before delivering anything.
Can you also tune this Temic DQ500 or remove EGR / AdBlue / DPF?
Yes — upload your own read through the tuning service and choose the modifications; every tuning job is quoted individually before you pay. The original on this page is useful as a backup before any modification is flashed.