06A906033PB — Siemens SIMOS7.8 ECU, Volkswagen GOLF 6
Original (stock) ECU file for the Volkswagen GOLF 6 — 1600 8V 102HP, Siemens SIMOS7.8 controller, hardware 06A906033PB, software 6645. Unmodified factory read, usually within 3 hours after we confirm your ECU numbers.
Identification
| Vehicle | Volkswagen GOLF 6 |
|---|---|
| Engine | 1600 8V 102HP |
| ECU | Siemens SIMOS7.8 |
| Hardware number | 06A906033PB |
| Software number | 6645 |
| Software upgrade | 06A906033PB_6645 |
| Calibration | 06A906033PB_6645 |
Compatibility
In our archive this exact read is recorded for the Volkswagen GOLF 6 with the 1600 8V 102HP engine. We hold 12 other reads for this model — see “Related files” below.
What you get
A full, unmodified read of the Siemens SIMOS7.8 as it left the factory — the binary file produced by the original reading tool, no checksum or map changes. Use it to restore a stock calibration after a failed flash or a bad tune, or as the reference file for a tuning job. One read is stored for this identification.
| Archive reference | Driver | Damos / A2L |
|---|---|---|
| C16_E7FD | C16_E7FD | CAS78223 |
Delivery: released to your account and announced by email usually within 3 hours, within 24 hours on business days, once we confirm the read matches the numbers on this page.
Questions about this file
Is this original file compatible with my Volkswagen GOLF 6?
Compare the hardware number (06A906033PB) and the software number (6645) with the identification your tool reads from the ECU. The software number must match; a different hardware revision usually means a different file. Identify the controller by the hardware and software numbers printed on its label or reported by your reading tool.
What exactly do I receive when I buy the Siemens SIMOS7.8 original for €25?
An unmodified factory read of the Siemens SIMOS7.8 (HW 06A906033PB, SW 6645, upgrade 06A906033PB_6645) as stored in our archive — a binary file in the format produced by the original reading tool. No modifications, no checksum changes: it is meant to restore the ECU to its stock calibration or to serve as a reference for a tuning job.
How and when is the file delivered?
After payment we confirm the read matches the numbers on this page and release it to your account, with an email notification — usually within 3 hours, within 24 hours on business days. If your ECU reports different numbers, tell us with the order and we look for the right file before delivering anything.
Can you also tune this Siemens SIMOS7.8 or remove EGR / AdBlue / DPF?
Yes — upload your own read through the tuning service and choose the modifications; every tuning job is quoted individually before you pay. The original on this page is useful as a backup before any modification is flashed.