RE551416 — Phoenix L23 ECU, John Deere 5085M

Original (stock) ECU file for the John Deere 5085M — 4500 85HP, Phoenix L23 controller, hardware RE551416, software SW62134E. Unmodified factory read, usually within 3 hours after we confirm your ECU numbers.

Part no. RE551416 Phoenix L23 1 read in archive

Identification

VehicleJohn Deere 5085M
Engine4500 85HP
Engine code4045HLV70
ECUPhoenix L23
Hardware numberRE551416
Software numberSW62134E

Compatibility

The same Phoenix L23 with part number RE551416 is also fitted to these vehicles / engines in our archive:

VehicleEngineSoftware
John Deere 5085M (this page)4500 85HP · 4045HLV70SW62134E
John Deere 5M4500 85HP · 4045HLV68SW60617F
John Deere 61004500 110HP · 4045HL490SW61935E
John Deere 61054500 105HP · 4045HL497SW62074A
John Deere 61054000 105HP · 4045HL497SW62074E
John Deere 61054500 130HP · 4045HL497SW61883F
John Deere 61054500 105HP · 4045HL497SW61883D
John Deere 61154500 115HP · 4045HL497SW61883B
John Deere 61154500 115HP · 4045HL496SW75062E
John Deere 61154500 115HP · 4045HL497SW62074A
John Deere 61154500 115HP · 4045HL497SW61883D
John Deere 61154500 130HP · 4045HL495SW62075B
John Deere 61254500 125HP · 4045HL495SW61884C
John Deere 61254500 125HP · 4045HL495SW61884B
John Deere 61254500 125HP · 4045HL495SW62075A
John Deere 61254500 125HP · 4045HL495SW62075B
John Deere 61304500 144HP · 4045HL496SW62075C
John Deere 61304500 130HP · 4045HL496SW61884C
John Deere 61304500 130HP · 4045HL496SW62075B
John Deere 61404500 140HP · 4045HL496SW61884C
John Deere 61406800 140HP · 6068HL490SW62087A
John Deere 61506800 150HP · 6068HL490SW61885C
John Deere 61506800 150HP · 6068HL490SW61885B
John Deere 61506800 150HP · 6068HL490SW62087A
John Deere 61506800 132HP · 6068HL490SW62087D
John Deere 61706800 144HP · 6068HL490SW62087D
John Deere 61706700 160HP · 6068HL490SW62087B

Cross references

Other software levels recorded on hardware RE551416:

What you get

A full, unmodified read of the Phoenix L23 as it left the factory — the binary file produced by the original reading tool, no checksum or map changes. Use it to restore a stock calibration after a failed flash or a bad tune, or as the reference file for a tuning job. One read is stored for this identification.

Archive referenceDriverDamos / A2L
JHD_02A4JHD_02A4SW62134E

Delivery: released to your account and announced by email usually within 3 hours, within 24 hours on business days, once we confirm the read matches the numbers on this page.

Questions about this file

Is this original file compatible with my John Deere 5085M?

Compare the hardware number (RE551416) and the software number (SW62134E) with the identification your tool reads from the ECU. The software number must match; a different hardware revision usually means a different file. Phoenix L-series controllers (John Deere) are identified by an RE part number such as RE532628 and an SW code; both are visible on the ECU label.

What exactly do I receive when I buy the Phoenix L23 original for €25?

An unmodified factory read of the Phoenix L23 (HW RE551416, SW SW62134E) as stored in our archive — a binary file in the format produced by the original reading tool. No modifications, no checksum changes: it is meant to restore the ECU to its stock calibration or to serve as a reference for a tuning job.

How and when is the file delivered?

After payment we confirm the read matches the numbers on this page and release it to your account, with an email notification — usually within 3 hours, within 24 hours on business days. If your ECU reports different numbers, tell us with the order and we look for the right file before delivering anything.

Can you also tune this Phoenix L23 or remove EGR / AdBlue / DPF?

Yes — upload your own read through the tuning service and choose the modifications; every tuning job is quoted individually before you pay. The original on this page is useful as a backup before any modification is flashed.