RE531808 — Phoenix L14 ECU, John Deere 6830

Original (stock) ECU file for the John Deere 6830 — 6800 150HP, Phoenix L14 controller, hardware RE531808, software SW60575A. Unmodified factory read, usually within 3 hours after we confirm your ECU numbers.

Part no. RE531808 Phoenix L14 1 read in archive

Identification

VehicleJohn Deere 6830
Engine6800 150HP
Engine code6068HL480
ECUPhoenix L14
Hardware numberRE531808
Software numberSW60575A

Compatibility

The same Phoenix L14 with part number RE531808 is also fitted to these vehicles / engines in our archive:

VehicleEngineSoftware
John Deere 6830 (this page)6800 150HP · 6068HL480SW60575A
John Deere 11106800 130HP · 6068HTJ88SW60604A
John Deere 1270D6800 195HPSW60220E
John Deere 47306800 245HP · 6068HRW78SW60145E
John Deere 62304500 100HP · 4045HL480SW60077C
John Deere 64304500 120HP · 4045HL480SW60077H
John Deere 64304500 116HP · 4045HL481SW60412B
John Deere 64304500 120HP · 4045HL480SW60077F
John Deere 65306800 120HP · 6068HL480SW60078F
John Deere 66306800 110HP · 6090HF485SW60426B
John Deere 68306800 140HP · 6068HL481SW60079E
John Deere 68306800 145HP · 6068HL487SW60575A
John Deere 68306800 145HP · 6068HL481SW60575A
John Deere 74306800 170HP · 6068HL488SW60429B
John Deere 74306800 170HP · 6068HL488SW60429BSW60429E
John Deere 74306800 166HP · 6068HL488SW60429D
John Deere 74306800 165HP · 6068HL482SW60080B
John Deere 74306800 165HP · 6068HL482SW60080E
John Deere 75306800 180HP · 6068HL483SW60222A
John Deere 75306800 185HP · 6068HL484SW60413A
John Deere 75306800 180HP · 6068HL482SW60080E
John Deere 96709000 325HP · 6090HCQ03SW60244C

Cross references

Other software levels recorded on hardware RE531808:

Other hardware carrying software SW60575A:

What you get

A full, unmodified read of the Phoenix L14 as it left the factory — the binary file produced by the original reading tool, no checksum or map changes. Use it to restore a stock calibration after a failed flash or a bad tune, or as the reference file for a tuning job. One read is stored for this identification.

Archive referenceDriverDamos / A2L
JHD_97BAJHD_97BA

Delivery: released to your account and announced by email usually within 3 hours, within 24 hours on business days, once we confirm the read matches the numbers on this page.

Questions about this file

Is this original file compatible with my John Deere 6830?

Compare the hardware number (RE531808) and the software number (SW60575A) with the identification your tool reads from the ECU. The software number must match; a different hardware revision usually means a different file. Phoenix L-series controllers (John Deere) are identified by an RE part number such as RE532628 and an SW code; both are visible on the ECU label.

What exactly do I receive when I buy the Phoenix L14 original for €25?

An unmodified factory read of the Phoenix L14 (HW RE531808, SW SW60575A) as stored in our archive — a binary file in the format produced by the original reading tool. No modifications, no checksum changes: it is meant to restore the ECU to its stock calibration or to serve as a reference for a tuning job.

How and when is the file delivered?

After payment we confirm the read matches the numbers on this page and release it to your account, with an email notification — usually within 3 hours, within 24 hours on business days. If your ECU reports different numbers, tell us with the order and we look for the right file before delivering anything.

Can you also tune this Phoenix L14 or remove EGR / AdBlue / DPF?

Yes — upload your own read through the tuning service and choose the modifications; every tuning job is quoted individually before you pay. The original on this page is useful as a backup before any modification is flashed.