RE522595 — Phoenix L14 ECU, John Deere HARVESTER 6000 SERIES
Original (stock) ECU file for the John Deere HARVESTER 6000 SERIES — 6800 211HP, Phoenix L14 controller, hardware RE522595, software SW60057J. Unmodified factory read, usually within 3 hours after we confirm your ECU numbers.
Identification
| Vehicle | John Deere HARVESTER 6000 SERIES |
|---|---|
| Engine | 6800 211HP |
| Engine code | 6090HF485 |
| ECU | Phoenix L14 |
| Hardware number | RE522595 |
| Software number | SW60057J |
Compatibility
The same Phoenix L14 with part number RE522595 is also fitted to these vehicles / engines in our archive:
| Vehicle | Engine | Software |
|---|---|---|
| John Deere HARVESTER 6000 SERIES (this page) | 6800 211HP · 6090HF485 | SW60057J |
| John Deere 6330 | 4500 120HP · 4045HL480 | SW60077F |
Cross references
Other software levels recorded on hardware RE522595:
Other hardware carrying software SW60057J:
What you get
A full, unmodified read of the Phoenix L14 as it left the factory — the binary file produced by the original reading tool, no checksum or map changes. Use it to restore a stock calibration after a failed flash or a bad tune, or as the reference file for a tuning job. One read is stored for this identification.
| Archive reference | Driver | Damos / A2L |
|---|---|---|
| JHD_A38F | JHD_A38F | — |
Delivery: released to your account and announced by email usually within 3 hours, within 24 hours on business days, once we confirm the read matches the numbers on this page.
Questions about this file
Is this original file compatible with my John Deere HARVESTER 6000 SERIES?
Compare the hardware number (RE522595) and the software number (SW60057J) with the identification your tool reads from the ECU. The software number must match; a different hardware revision usually means a different file. Phoenix L-series controllers (John Deere) are identified by an RE part number such as RE532628 and an SW code; both are visible on the ECU label.
What exactly do I receive when I buy the Phoenix L14 original for €25?
An unmodified factory read of the Phoenix L14 (HW RE522595, SW SW60057J) as stored in our archive — a binary file in the format produced by the original reading tool. No modifications, no checksum changes: it is meant to restore the ECU to its stock calibration or to serve as a reference for a tuning job.
How and when is the file delivered?
After payment we confirm the read matches the numbers on this page and release it to your account, with an email notification — usually within 3 hours, within 24 hours on business days. If your ECU reports different numbers, tell us with the order and we look for the right file before delivering anything.
Can you also tune this Phoenix L14 or remove EGR / AdBlue / DPF?
Yes — upload your own read through the tuning service and choose the modifications; every tuning job is quoted individually before you pay. The original on this page is useful as a backup before any modification is flashed.