070214 — Motorola EMS S6 DC1215 ECU, Scania R420
Original (stock) ECU file for the Scania R420 — 12000 420HP, Motorola EMS S6 DC1215 controller, hardware 070214, software 4044. Unmodified factory read, usually within 3 hours after we confirm your ECU numbers.
Identification
| Vehicle | Scania R420 |
|---|---|
| Engine | 12000 420HP |
| Engine code | DC12 15 |
| ECU | Motorola EMS S6 DC1215 |
| Hardware number | 070214 |
| Software number | 4044 |
Compatibility
In our archive this exact read is recorded for the Scania R420 with the 12000 420HP engine (DC12 15). We hold 39 other reads for this model — see “Related files” below. The Motorola EMS S6 DC1215 controller appears 4 times across the catalogue.
Cross references
Other software levels recorded on hardware 070214:
Other hardware carrying software 4044:
What you get
A full, unmodified read of the Motorola EMS S6 DC1215 as it left the factory — the binary file produced by the original reading tool, no checksum or map changes. Use it to restore a stock calibration after a failed flash or a bad tune, or as the reference file for a tuning job. One read is stored for this identification.
| Archive reference | Driver | Damos / A2L |
|---|---|---|
| SCA_DECC | SCA_DECC | — |
Delivery: released to your account and announced by email usually within 3 hours, within 24 hours on business days, once we confirm the read matches the numbers on this page.
Questions about this file
Is this original file compatible with my Scania R420?
Compare the hardware number (070214) and the software number (4044) with the identification your tool reads from the ECU. The software number must match; a different hardware revision usually means a different file. Continental/Siemens EMS S6 and EMS S8 controllers (Scania) are identified by a 7-digit hardware number and a 7-digit software number read by the tool or shown in SDP3.
What exactly do I receive when I buy the Motorola EMS S6 DC1215 original for €25?
An unmodified factory read of the Motorola EMS S6 DC1215 (HW 070214, SW 4044) as stored in our archive — a binary file in the format produced by the original reading tool. No modifications, no checksum changes: it is meant to restore the ECU to its stock calibration or to serve as a reference for a tuning job.
How and when is the file delivered?
After payment we confirm the read matches the numbers on this page and release it to your account, with an email notification — usually within 3 hours, within 24 hours on business days. If your ECU reports different numbers, tell us with the order and we look for the right file before delivering anything.
Can you also tune this Motorola EMS S6 DC1215 or remove EGR / AdBlue / DPF?
Yes — upload your own read through the tuning service and choose the modifications; every tuning job is quoted individually before you pay. The original on this page is useful as a backup before any modification is flashed.