Login

1726098 — Motorola EMS S6 DC1206 ECU, Scania R420

Original (stock) ECU file for the Scania R420 — 12000 420HP, Motorola EMS S6 DC1206 controller, hardware 1726098, software 1916394. Unmodified factory read, usually within 3 hours after we confirm your ECU numbers.

Part no. 1726098 Motorola EMS S6 DC1206 1 read in archive

Identification

VehicleScania R420
Engine12000 420HP
Engine codeDC1206
ECUMotorola EMS S6 DC1206
Hardware number1726098
Software number1916394

Compatibility

The same Motorola EMS S6 DC1206 with part number 1726098 is also fitted to these vehicles / engines in our archive:

VehicleEngineSoftware
Scania R420 (this page)12000 420HP · DC12061916394
Scania G42012000 420HP · DC12 061805328

Cross references

Other software levels recorded on hardware 1726098:

  • software n/a — Scania R500, 16000 620HP
  • 1797793 — Scania R470, 12000 470HP
  • 1798073 — Scania R470, 12000 470HP
  • 1805328 — Scania G420, 12000 420HP
  • 1858367 — Scania BUS, 9000 320HP
  • 1869394 — Scania R500, 16000 500HP
  • 1878452 — Scania R340, 12000 340HP
  • 1893283 — Scania G380, 12000 380HP
  • 2006193 — Scania R500, 16000 494HP
  • 2006193 — Scania R500, 16000 494HP
  • 2058999 — Scania R560, 15600 560HP
  • 2087606 — Scania INDUSTRIAL EQUIPMENT, 9300 350HP
  • 2087606 — Scania INDUSTRIAL EQUIPMENT, 9300 350HP
  • 2095174 — Scania P340, 11000 340HP
  • 2095178 — Scania R420, 12000 420HP
  • 2095185 — Scania G380, 117L E4 380HP
  • 2095203 — Scania G440, 13000 440HP
  • 2095221 — Scania P270, 9000 270HP
  • 2095221 — Scania P270, 9000 270HP
  • 2149401 — Scania R440, 12.7L 440HP
  • 2156341 — Scania R500, 16000 500HP
  • 2271257 — Scania P360, 13000 360HP
  • 2271257 — Scania P360, 13000 360HP
  • 2419191 — Scania R500, 15600 560HP
  • 2419192 — Scania R500, 15600 500HP
  • 2424162 — Scania G360, 12700 380HP
  • 2462449 — Scania R500, 16000 620HP
  • 2570129 — Scania P360, 13000 380HP
  • 2650514 — Scania R500, 16000 620HP

What you get

A full, unmodified read of the Motorola EMS S6 DC1206 as it left the factory — the binary file produced by the original reading tool, no checksum or map changes. Use it to restore a stock calibration after a failed flash or a bad tune, or as the reference file for a tuning job. One read is stored for this identification.

Archive referenceDriverDamos / A2L
SCA_E00ASCA_E00A—

Delivery: released to your account and announced by email usually within 3 hours, within 24 hours on business days, once we confirm the read matches the numbers on this page.

Questions about this file

Is this original file compatible with my Scania R420?

Compare the hardware number (1726098) and the software number (1916394) with the identification your tool reads from the ECU. The software number must match; a different hardware revision usually means a different file. Continental/Siemens EMS S6 and EMS S8 controllers (Scania) are identified by a 7-digit hardware number and a 7-digit software number read by the tool or shown in SDP3.

What exactly do I receive when I buy the Motorola EMS S6 DC1206 original for €25?

An unmodified factory read of the Motorola EMS S6 DC1206 (HW 1726098, SW 1916394) as stored in our archive — a binary file in the format produced by the original reading tool. No modifications, no checksum changes: it is meant to restore the ECU to its stock calibration or to serve as a reference for a tuning job.

How and when is the file delivered?

After payment we confirm the read matches the numbers on this page and release it to your account, with an email notification — usually within 3 hours, within 24 hours on business days. If your ECU reports different numbers, tell us with the order and we look for the right file before delivering anything.

Can you also tune this Motorola EMS S6 DC1206 or remove EGR / AdBlue / DPF?

Yes — upload your own read through the tuning service and choose the modifications; every tuning job is quoted individually before you pay. The original on this page is useful as a backup before any modification is flashed.