1887331A — Delphi PC31214R04 ECU, DAF XF105
Original (stock) ECU file for the DAF XF105 — 12900 460HP, Delphi PC31214R04 controller, hardware 1887331A, software PC3__1214R04_. Unmodified factory read, usually within 3 hours after we confirm your ECU numbers.
Identification
| Vehicle | DAF XF105 |
|---|---|
| Engine | 12900 460HP |
| Engine code | A141648 |
| ECU | Delphi PC31214R04 |
| Hardware number | 1887331A |
| Software number | PC3__1214R04_ |
Compatibility
The same Delphi PC31214R04 with part number 1887331A is also fitted to these vehicles / engines in our archive:
| Vehicle | Engine | Software |
|---|---|---|
| DAF XF105 (this page) | 12900 460HP · A141648 | PC3__1214R04_ |
| DAF XF105 | 12900 460HP · A-16434 | 1887331A |
Cross references
Other hardware carrying software PC3__1214R04_:
What you get
A full, unmodified read of the Delphi PC31214R04 as it left the factory — the binary file produced by the original reading tool, no checksum or map changes. Use it to restore a stock calibration after a failed flash or a bad tune, or as the reference file for a tuning job. One read is stored for this identification.
| Archive reference | Driver | Damos / A2L |
|---|---|---|
| DAF_9C26 | DAF_9C26 | — |
Delivery: released to your account and announced by email usually within 3 hours, within 24 hours on business days, once we confirm the read matches the numbers on this page.
Questions about this file
Is this original file compatible with my DAF XF105?
Compare the hardware number (1887331A) and the software number (PC3__1214R04_) with the identification your tool reads from the ECU. The software number must match; a different hardware revision usually means a different file. Delphi DMCI / ETC3 / PC controllers (DAF, Renault) are identified by the software number printed on the label; the read is usually done in bench mode.
What exactly do I receive when I buy the Delphi PC31214R04 original for €25?
An unmodified factory read of the Delphi PC31214R04 (HW 1887331A, SW PC3__1214R04_) as stored in our archive — a binary file in the format produced by the original reading tool. No modifications, no checksum changes: it is meant to restore the ECU to its stock calibration or to serve as a reference for a tuning job.
How and when is the file delivered?
After payment we confirm the read matches the numbers on this page and release it to your account, with an email notification — usually within 3 hours, within 24 hours on business days. If your ECU reports different numbers, tell us with the order and we look for the right file before delivering anything.
Can you also tune this Delphi PC31214R04 or remove EGR / AdBlue / DPF?
Yes — upload your own read through the tuning service and choose the modifications; every tuning job is quoted individually before you pay. The original on this page is useful as a backup before any modification is flashed.