1684367A — Delphi PC31194R03A ECU, DAF TE
Original (stock) ECU file for the DAF TE — 12900 462HP, Delphi PC31194R03A controller, hardware 1684367A, software PC3__1194R03A. Unmodified factory read, usually within 3 hours after we confirm your ECU numbers.
Identification
| Vehicle | DAF TE |
|---|---|
| Engine | 12900 462HP |
| ECU | Delphi PC31194R03A |
| Hardware number | 1684367A |
| Software number | PC3__1194R03A |
Compatibility
The same Delphi PC31194R03A with part number 1684367A is also fitted to these vehicles / engines in our archive:
| Vehicle | Engine | Software |
|---|---|---|
| DAF TE (this page) | 12900 462HP | PC3__1194R03A |
| DAF CF85 | 7500 360HP · I-06392 | PC3__1194R03A |
Cross references
Other software levels recorded on hardware 1684367A:
Other hardware carrying software PC3__1194R03A:
What you get
A full, unmodified read of the Delphi PC31194R03A as it left the factory — the binary file produced by the original reading tool, no checksum or map changes. Use it to restore a stock calibration after a failed flash or a bad tune, or as the reference file for a tuning job. One read is stored for this identification.
| Archive reference | Driver | Damos / A2L |
|---|---|---|
| DAF_F0BF | DAF_F0BF | — |
Delivery: released to your account and announced by email usually within 3 hours, within 24 hours on business days, once we confirm the read matches the numbers on this page.
Questions about this file
Is this original file compatible with my DAF TE?
Compare the hardware number (1684367A) and the software number (PC3__1194R03A) with the identification your tool reads from the ECU. The software number must match; a different hardware revision usually means a different file. Delphi DMCI / ETC3 / PC controllers (DAF, Renault) are identified by the software number printed on the label; the read is usually done in bench mode.
What exactly do I receive when I buy the Delphi PC31194R03A original for €25?
An unmodified factory read of the Delphi PC31194R03A (HW 1684367A, SW PC3__1194R03A) as stored in our archive — a binary file in the format produced by the original reading tool. No modifications, no checksum changes: it is meant to restore the ECU to its stock calibration or to serve as a reference for a tuning job.
How and when is the file delivered?
After payment we confirm the read matches the numbers on this page and release it to your account, with an email notification — usually within 3 hours, within 24 hours on business days. If your ECU reports different numbers, tell us with the order and we look for the right file before delivering anything.
Can you also tune this Delphi PC31194R03A or remove EGR / AdBlue / DPF?
Yes — upload your own read through the tuning service and choose the modifications; every tuning job is quoted individually before you pay. The original on this page is useful as a backup before any modification is flashed.