1679021A — Delphi PC31170R02A ECU, DAF CF75
Original (stock) ECU file for the DAF CF75 — 9200 250HP, Delphi PC31170R02A controller, hardware 1679021A, software PC3__1170R02A. Unmodified factory read, usually within 3 hours after we confirm your ECU numbers.
Identification
| Vehicle | DAF CF75 |
|---|---|
| Engine | 9200 250HP |
| Engine code | I-01337 |
| ECU | Delphi PC31170R02A |
| Hardware number | 1679021A |
| Software number | PC3__1170R02A |
Compatibility
In our archive this exact read is recorded for the DAF CF75 with the 9200 250HP engine (I-01337). We hold 6 other reads for this model — see “Related files” below. The Delphi PC31170R02A controller appears 4 times across the catalogue.
What you get
A full, unmodified read of the Delphi PC31170R02A as it left the factory — the binary file produced by the original reading tool, no checksum or map changes. Use it to restore a stock calibration after a failed flash or a bad tune, or as the reference file for a tuning job. 2 reads are stored for this identification; you receive the one matching your ECU identification.
| Archive reference | Driver | Damos / A2L |
|---|---|---|
| DAF_4F24 | DAF_4F24 | — |
| DAF_D3E4 | DAF_D3E4 | — |
Delivery: released to your account and announced by email usually within 3 hours, within 24 hours on business days, once we confirm the read matches the numbers on this page.
Questions about this file
Is this original file compatible with my DAF CF75?
Compare the hardware number (1679021A) and the software number (PC3__1170R02A) with the identification your tool reads from the ECU. The software number must match; a different hardware revision usually means a different file. Delphi DMCI / ETC3 / PC controllers (DAF, Renault) are identified by the software number printed on the label; the read is usually done in bench mode.
What exactly do I receive when I buy the Delphi PC31170R02A original for €25?
An unmodified factory read of the Delphi PC31170R02A (HW 1679021A, SW PC3__1170R02A) as stored in our archive — a binary file in the format produced by the original reading tool, chosen among the 2 reads listed on this page after we match your identification. No modifications, no checksum changes: it is meant to restore the ECU to its stock calibration or to serve as a reference for a tuning job.
How and when is the file delivered?
After payment we confirm the read matches the numbers on this page and release it to your account, with an email notification — usually within 3 hours, within 24 hours on business days. If your ECU reports different numbers, tell us with the order and we look for the right file before delivering anything.
Can you also tune this Delphi PC31170R02A or remove EGR / AdBlue / DPF?
Yes — upload your own read through the tuning service and choose the modifications; every tuning job is quoted individually before you pay. The original on this page is useful as a backup before any modification is flashed.