2013285 — Delphi ETC3 ECU, DAF XF106
Original (stock) ECU file for the DAF XF106 — 12000 510HP, Delphi ETC3 controller, software 2013285. Unmodified factory read, usually within 3 hours after we confirm your ECU numbers.
Identification
| Vehicle | DAF XF106 |
|---|---|
| Engine | 12000 510HP |
| Engine code | A207109 |
| ECU | Delphi ETC3 |
| Software number | 2013285 |
Compatibility
The same Delphi ETC3 with part number 2013285 is also fitted to these vehicles / engines in our archive:
| Vehicle | Engine | Software |
|---|---|---|
| DAF XF106 (this page) | 12000 510HP · A207109 | 2013285 |
| DAF XF106 | 12000 510HP · A207125 | 2013285 |
| DAF XF106 | 12000 510HP · A239862 | 2013285 |
| DAF XF106 | 12000 510HP · A205169 | 2013285 |
| DAF XF106 | 12000 510HP · A205424 | 2013285 |
| DAF XF106 | 12000 510HP · A247821 | 2013285 |
| DAF XF106 | 12000 510HP · A218326 | 2013285 |
| DAF XF106 | 12000 510HP | 2013285 |
| DAF XF106 | 12000 510HP · A232525 | 2013285 |
| DAF XF106 | 12000 510HP · A217977 | 2013285 |
Cross references
Other hardware carrying software 2013285:
What you get
A full, unmodified read of the Delphi ETC3 as it left the factory — the binary file produced by the original reading tool, no checksum or map changes. Use it to restore a stock calibration after a failed flash or a bad tune, or as the reference file for a tuning job. One read is stored for this identification.
| Archive reference | Driver | Damos / A2L |
|---|---|---|
| DAF_EF46 | DAF_EF46 | 1408P151F |
Delivery: released to your account and announced by email usually within 3 hours, within 24 hours on business days, once we confirm the read matches the numbers on this page.
Questions about this file
Is this original file compatible with my DAF XF106?
Compare the software number (2013285) with the identification your tool reads from the ECU. If your software number differs, tell us — we check whether a matching original exists. Delphi DMCI / ETC3 / PC controllers (DAF, Renault) are identified by the software number printed on the label; the read is usually done in bench mode.
What exactly do I receive when I buy the Delphi ETC3 original for €25?
An unmodified factory read of the Delphi ETC3 (SW 2013285) as stored in our archive — a binary file in the format produced by the original reading tool. No modifications, no checksum changes: it is meant to restore the ECU to its stock calibration or to serve as a reference for a tuning job.
How and when is the file delivered?
After payment we confirm the read matches the numbers on this page and release it to your account, with an email notification — usually within 3 hours, within 24 hours on business days. If your ECU reports different numbers, tell us with the order and we look for the right file before delivering anything.
Can you also tune this Delphi ETC3 or remove EGR / AdBlue / DPF?
Yes — upload your own read through the tuning service and choose the modifications; every tuning job is quoted individually before you pay. The original on this page is useful as a backup before any modification is flashed.