04L906056SM — Delphi DCM6.2 ECU, MAN TG-E
Original (stock) ECU file for the MAN TG-E — 2000 180HP, Delphi DCM6.2 controller, hardware 04L906056SM, software 9973. Unmodified factory read, usually within 3 hours after we confirm your ECU numbers.
Identification
| Vehicle | MAN TG-E |
|---|---|
| Engine | 2000 180HP |
| ECU | Delphi DCM6.2 |
| Hardware number | 04L906056SM |
| Software number | 9973 |
| Software upgrade | 04L906056SM_9973 |
| Calibration | 04L906056SM_9973 |
Compatibility
In our archive this exact read is recorded for the MAN TG-E with the 2000 180HP engine. We hold 10 other reads for this model — see “Related files” below. The Delphi DCM6.2 controller appears 14 times across the catalogue.
Cross references
Other hardware carrying software 9973:
What you get
A full, unmodified read of the Delphi DCM6.2 as it left the factory — the binary file produced by the original reading tool, no checksum or map changes. Use it to restore a stock calibration after a failed flash or a bad tune, or as the reference file for a tuning job. One read is stored for this identification.
| Archive reference | Driver | Damos / A2L |
|---|---|---|
| M20_A7F6 | M20_A7F6 | FM48D11 |
Delivery: released to your account and announced by email usually within 3 hours, within 24 hours on business days, once we confirm the read matches the numbers on this page.
Questions about this file
Is this original file compatible with my MAN TG-E?
Compare the hardware number (04L906056SM) and the software number (9973) with the identification your tool reads from the ECU. The software number must match; a different hardware revision usually means a different file. Delphi DMCI / ETC3 / PC controllers (DAF, Renault) are identified by the software number printed on the label; the read is usually done in bench mode.
What exactly do I receive when I buy the Delphi DCM6.2 original for €25?
An unmodified factory read of the Delphi DCM6.2 (HW 04L906056SM, SW 9973, upgrade 04L906056SM_9973) as stored in our archive — a binary file in the format produced by the original reading tool. No modifications, no checksum changes: it is meant to restore the ECU to its stock calibration or to serve as a reference for a tuning job.
How and when is the file delivered?
After payment we confirm the read matches the numbers on this page and release it to your account, with an email notification — usually within 3 hours, within 24 hours on business days. If your ECU reports different numbers, tell us with the order and we look for the right file before delivering anything.
Can you also tune this Delphi DCM6.2 or remove EGR / AdBlue / DPF?
Yes — upload your own read through the tuning service and choose the modifications; every tuning job is quoted individually before you pay. The original on this page is useful as a backup before any modification is flashed.