A0014463435ZGS003 — Continental MCM2.1 ECU, Mercedes-Benz ACTROS
Original (stock) ECU file for the Mercedes-Benz ACTROS — 12800 450HP, Continental MCM2.1 controller, hardware A0014463435ZGS003, software A0334483935ZGS001. Unmodified factory read, usually within 3 hours after we confirm your ECU numbers.
Identification
| Vehicle | Mercedes-Benz ACTROS |
|---|---|
| Engine | 12800 450HP |
| ECU | Continental MCM2.1 |
| Hardware number | A0014463435ZGS003 |
| Software number | A0334483935ZGS001 |
| Software upgrade | A0344486835ZGS001 |
Compatibility
The same Continental MCM2.1 with part number A0014463435ZGS003 is also fitted to these vehicles / engines in our archive:
| Vehicle | Engine | Software |
|---|---|---|
| Mercedes-Benz ACTROS (this page) | 12800 450HP | A0334483935ZGS001 |
| Mercedes-Benz ACTROS | 12800 450HP | A0334483935ZGS001 |
Cross references
Other software levels recorded on hardware A0014463435ZGS003:
Other hardware carrying software A0334483935ZGS001:
What you get
A full, unmodified read of the Continental MCM2.1 as it left the factory — the binary file produced by the original reading tool, no checksum or map changes. Use it to restore a stock calibration after a failed flash or a bad tune, or as the reference file for a tuning job. One read is stored for this identification.
| Archive reference | Driver | Damos / A2L |
|---|---|---|
| MXXXFFF0 | MXXXFFF0 | — |
Delivery: released to your account and announced by email usually within 3 hours, within 24 hours on business days, once we confirm the read matches the numbers on this page.
Questions about this file
Is this original file compatible with my Mercedes-Benz ACTROS?
Compare the hardware number (A0014463435ZGS003) and the software number (A0334483935ZGS001) with the identification your tool reads from the ECU. The software number must match; a different hardware revision usually means a different file. Temic / Continental MR, MCM, ACM and CPC controllers (Mercedes-Benz) use A-part numbers such as A0024461235ZGS002; the ZGS suffix is the release state of that part.
What exactly do I receive when I buy the Continental MCM2.1 original for €25?
An unmodified factory read of the Continental MCM2.1 (HW A0014463435ZGS003, SW A0334483935ZGS001, upgrade A0344486835ZGS001) as stored in our archive — a binary file in the format produced by the original reading tool. No modifications, no checksum changes: it is meant to restore the ECU to its stock calibration or to serve as a reference for a tuning job.
How and when is the file delivered?
After payment we confirm the read matches the numbers on this page and release it to your account, with an email notification — usually within 3 hours, within 24 hours on business days. If your ECU reports different numbers, tell us with the order and we look for the right file before delivering anything.
Can you also tune this Continental MCM2.1 or remove EGR / AdBlue / DPF?
Yes — upload your own read through the tuning service and choose the modifications; every tuning job is quoted individually before you pay. The original on this page is useful as a backup before any modification is flashed.