3513155-01 — Caterpillar A5E2 ECU, Caterpillar 444F
Original (stock) ECU file for the Caterpillar 444F — 4400 100HP, Caterpillar A5E2 controller, hardware 3513155-01, software 3513155-01. Unmodified factory read, usually within 3 hours after we confirm your ECU numbers.
Identification
| Vehicle | Caterpillar 444F |
|---|---|
| Engine | 4400 100HP |
| Engine code | C4.4 |
| ECU | Caterpillar A5E2 |
| Hardware number | 3513155-01 |
| Software number | 3513155-01 |
Compatibility
The same Caterpillar A5E2 with part number 3513155-01 is also fitted to these vehicles / engines in our archive:
| Vehicle | Engine | Software |
|---|---|---|
| Caterpillar 444F (this page) | 4400 100HP · C4.4 | 3513155-01 |
| Caterpillar 444F | 4400 100HP · C4.4 | 3453388-03 |
| Caterpillar 444F | 4400 95HP · C4.4 | 3453388-04 |
Cross references
Other software levels recorded on hardware 3513155-01:
What you get
A full, unmodified read of the Caterpillar A5E2 as it left the factory — the binary file produced by the original reading tool, no checksum or map changes. Use it to restore a stock calibration after a failed flash or a bad tune, or as the reference file for a tuning job. One read is stored for this identification.
| Archive reference | Driver | Damos / A2L |
|---|---|---|
| CAT_9AAB | CAT_9AAB | — |
Delivery: released to your account and announced by email usually within 3 hours, within 24 hours on business days, once we confirm the read matches the numbers on this page.
Questions about this file
Is this original file compatible with my Caterpillar 444F?
Compare the hardware number (3513155-01) and the software number (3513155-01) with the identification your tool reads from the ECU. The software number must match; a different hardware revision usually means a different file. Identify the controller by the hardware and software numbers printed on its label or reported by your reading tool.
What exactly do I receive when I buy the Caterpillar A5E2 original for €25?
An unmodified factory read of the Caterpillar A5E2 (HW 3513155-01, SW 3513155-01) as stored in our archive — a binary file in the format produced by the original reading tool. No modifications, no checksum changes: it is meant to restore the ECU to its stock calibration or to serve as a reference for a tuning job.
How and when is the file delivered?
After payment we confirm the read matches the numbers on this page and release it to your account, with an email notification — usually within 3 hours, within 24 hours on business days. If your ECU reports different numbers, tell us with the order and we look for the right file before delivering anything.
Can you also tune this Caterpillar A5E2 or remove EGR / AdBlue / DPF?
Yes — upload your own read through the tuning service and choose the modifications; every tuning job is quoted individually before you pay. The original on this page is useful as a backup before any modification is flashed.