10SW029548 — Bosch MG1CS001 ECU, Volkswagen ARTEON
Original (stock) ECU file for the Volkswagen ARTEON — 2000 190HP, Bosch MG1CS001 controller, software 10SW029548. Unmodified factory read, usually within 3 hours after we confirm your ECU numbers.
Identification
| Vehicle | Volkswagen ARTEON |
|---|---|
| Engine | 2000 190HP |
| ECU | Bosch MG1CS001 |
| Software number | 10SW029548 |
| Calibration | 3GD907115A_0004 |
Compatibility
The same Bosch MG1CS001 with part number 10SW029548 is also fitted to these vehicles / engines in our archive:
| Vehicle | Engine | Software |
|---|---|---|
| Volkswagen ARTEON (this page) | 2000 190HP | 10SW029548 |
| Volkswagen ARTEON | 2000 190HP | 10SW029548 |
| Volkswagen CC | 2000 190HP | 10SW029548 |
Cross references
Other hardware carrying software 10SW029548:
What you get
A full, unmodified read of the Bosch MG1CS001 as it left the factory — the binary file produced by the original reading tool, no checksum or map changes. Use it to restore a stock calibration after a failed flash or a bad tune, or as the reference file for a tuning job. One read is stored for this identification.
| Archive reference | Driver | Damos / A2L |
|---|---|---|
| A20_6636 | A20_6636 | — |
Delivery: released to your account and announced by email usually within 3 hours, within 24 hours on business days, once we confirm the read matches the numbers on this page.
Questions about this file
Is this original file compatible with my Volkswagen ARTEON?
Compare the software number (10SW029548) with the identification your tool reads from the ECU. If your software number differs, tell us — we check whether a matching original exists. Identify the controller by the hardware and software numbers printed on its label or reported by your reading tool.
What exactly do I receive when I buy the Bosch MG1CS001 original for €25?
An unmodified factory read of the Bosch MG1CS001 (SW 10SW029548) as stored in our archive — a binary file in the format produced by the original reading tool. No modifications, no checksum changes: it is meant to restore the ECU to its stock calibration or to serve as a reference for a tuning job.
How and when is the file delivered?
After payment we confirm the read matches the numbers on this page and release it to your account, with an email notification — usually within 3 hours, within 24 hours on business days. If your ECU reports different numbers, tell us with the order and we look for the right file before delivering anything.
Can you also tune this Bosch MG1CS001 or remove EGR / AdBlue / DPF?
Yes — upload your own read through the tuning service and choose the modifications; every tuning job is quoted individually before you pay. The original on this page is useful as a backup before any modification is flashed.