Login

1037369956 — Bosch EDC7U1 ECU, Mack 613

Original (stock) ECU file for the Mack 613 — 11900 470HP, Bosch EDC7U1 controller, hardware 0281XXXXXX, software 1037369956. Unmodified factory read, usually within 3 hours after we confirm your ECU numbers.

Part no. 1037369956 Bosch EDC7U1 1 read in archive identified by software number

Identification

VehicleMack 613
Engine11900 470HP
ECUBosch EDC7U1
Hardware number0281XXXXXX
Software number1037369956

Compatibility

In our archive this exact read is recorded for the Mack 613 with the 11900 470HP engine. We hold 4 other reads for this model — see “Related files” below. The Bosch EDC7U1 controller appears 3 times across the catalogue.

Cross references

Other software levels recorded on hardware 0281XXXXXX:

What you get

A full, unmodified read of the Bosch EDC7U1 as it left the factory — the binary file produced by the original reading tool, no checksum or map changes. Use it to restore a stock calibration after a failed flash or a bad tune, or as the reference file for a tuning job. One read is stored for this identification.

Archive referenceDriverDamos / A2L
MACK2D5EMACK2D5E—

Delivery: released to your account and announced by email usually within 3 hours, within 24 hours on business days, once we confirm the read matches the numbers on this page.

Questions about this file

Is this original file compatible with my Mack 613?

Compare the hardware number (0281XXXXXX) and the software number (1037369956) with the identification your tool reads from the ECU. The software number must match; a different hardware revision usually means a different file. Bosch EDC7 controllers (EDC7C32, EDC7UC31, EDC7C1…) are identified by a 0281 hardware number and a 1037 software number printed on the label and readable by OBD.

What exactly do I receive when I buy the Bosch EDC7U1 original for €25?

An unmodified factory read of the Bosch EDC7U1 (HW 0281XXXXXX, SW 1037369956) as stored in our archive — a binary file in the format produced by the original reading tool. No modifications, no checksum changes: it is meant to restore the ECU to its stock calibration or to serve as a reference for a tuning job.

How and when is the file delivered?

After payment we confirm the read matches the numbers on this page and release it to your account, with an email notification — usually within 3 hours, within 24 hours on business days. If your ECU reports different numbers, tell us with the order and we look for the right file before delivering anything.

Can you also tune this Bosch EDC7U1 or remove EGR / AdBlue / DPF?

Yes — upload your own read through the tuning service and choose the modifications; every tuning job is quoted individually before you pay. The original on this page is useful as a backup before any modification is flashed.