Y281S01300 — Bosch EDC7C1 ECU, Volvo Penta D4
Original (stock) ECU file for the Volvo Penta D4 — 3600 225HP, Bosch EDC7C1 controller, hardware Y281S01300. Unmodified factory read, usually within 3 hours after we confirm your ECU numbers.
Identification
| Vehicle | Volvo Penta D4 |
|---|---|
| Engine | 3600 225HP |
| ECU | Bosch EDC7C1 |
| Hardware number | Y281S01300 |
| Software upgrade | P_300.2.0.6 |
Compatibility
In our archive this exact read is recorded for the Volvo Penta D4 with the 3600 225HP engine. We hold 4 other reads for this model — see “Related files” below. The Bosch EDC7C1 controller appears 27 times across the catalogue.
What you get
A full, unmodified read of the Bosch EDC7C1 as it left the factory — the binary file produced by the original reading tool, no checksum or map changes. Use it to restore a stock calibration after a failed flash or a bad tune, or as the reference file for a tuning job. One read is stored for this identification.
| Archive reference | Driver | Damos / A2L |
|---|---|---|
| V36_2C11 | V36_2C11 | — |
Delivery: released to your account and announced by email usually within 3 hours, within 24 hours on business days, once we confirm the read matches the numbers on this page.
Questions about this file
Is this original file compatible with my Volvo Penta D4?
Compare the hardware number (Y281S01300) with the identification your tool reads from the ECU, then send us the software number you read so we confirm the exact calibration before delivery. Bosch EDC7 controllers (EDC7C32, EDC7UC31, EDC7C1…) are identified by a 0281 hardware number and a 1037 software number printed on the label and readable by OBD.
What exactly do I receive when I buy the Bosch EDC7C1 original for €25?
An unmodified factory read of the Bosch EDC7C1 (HW Y281S01300, upgrade P_300.2.0.6) as stored in our archive — a binary file in the format produced by the original reading tool. No modifications, no checksum changes: it is meant to restore the ECU to its stock calibration or to serve as a reference for a tuning job.
How and when is the file delivered?
After payment we confirm the read matches the numbers on this page and release it to your account, with an email notification — usually within 3 hours, within 24 hours on business days. If your ECU reports different numbers, tell us with the order and we look for the right file before delivering anything.
Can you also tune this Bosch EDC7C1 or remove EGR / AdBlue / DPF?
Yes — upload your own read through the tuning service and choose the modifications; every tuning job is quoted individually before you pay. The original on this page is useful as a backup before any modification is flashed.