0281030170 — Bosch EDC17C64 ECU, Volkswagen CADDY
Original (stock) ECU file for the Volkswagen CADDY — 2000 110HP, Bosch EDC17C64 controller, hardware 0281030170, software 10SW003742. Unmodified factory read, usually within 3 hours after we confirm your ECU numbers.
Identification
| Vehicle | Volkswagen CADDY |
|---|---|
| Engine | 2000 110HP |
| Engine code | DFSF |
| ECU | Bosch EDC17C64 |
| Hardware number | 0281030170 |
| Software number | 10SW003742 |
| Software upgrade | 04L906016GJ_1666 |
| Calibration | 04L906016GJ_1666 |
Compatibility
The same Bosch EDC17C64 with part number 0281030170 is also fitted to these vehicles / engines in our archive:
| Vehicle | Engine | Software |
|---|---|---|
| Volkswagen CADDY (this page) | 2000 110HP · DFSF | 10SW003742 |
| Volkswagen CADDY | 2000 110HP · DFSF | 1037533463 |
| Volkswagen CADDY | 2000 75HP · CUUF | 1037555489 |
Cross references
Other software levels recorded on hardware 0281030170:
What you get
A full, unmodified read of the Bosch EDC17C64 as it left the factory — the binary file produced by the original reading tool, no checksum or map changes. Use it to restore a stock calibration after a failed flash or a bad tune, or as the reference file for a tuning job. One read is stored for this identification.
| Archive reference | Driver | Damos / A2L |
|---|---|---|
| C170_742 | C170_742 | P866G8P0 |
Delivery: released to your account and announced by email usually within 3 hours, within 24 hours on business days, once we confirm the read matches the numbers on this page.
Questions about this file
Is this original file compatible with my Volkswagen CADDY?
Compare the hardware number (0281030170) and the software number (10SW003742) with the identification your tool reads from the ECU. The software number must match; a different hardware revision usually means a different file. Bosch EDC17 controllers are identified by a 0281 hardware number and a 1037 software number. Many EDC17 variants on trucks are read in boot/bench mode rather than OBD, so make sure the tool identification matches these numbers before flashing.
What exactly do I receive when I buy the Bosch EDC17C64 original for €25?
An unmodified factory read of the Bosch EDC17C64 (HW 0281030170, SW 10SW003742, upgrade 04L906016GJ_1666) as stored in our archive — a binary file in the format produced by the original reading tool. No modifications, no checksum changes: it is meant to restore the ECU to its stock calibration or to serve as a reference for a tuning job.
How and when is the file delivered?
After payment we confirm the read matches the numbers on this page and release it to your account, with an email notification — usually within 3 hours, within 24 hours on business days. If your ECU reports different numbers, tell us with the order and we look for the right file before delivering anything.
Can you also tune this Bosch EDC17C64 or remove EGR / AdBlue / DPF?
Yes — upload your own read through the tuning service and choose the modifications; every tuning job is quoted individually before you pay. The original on this page is useful as a backup before any modification is flashed.