P_826_EDC17_671.hex — Bosch EDC17C49 ECU, New Holland T4
Original (stock) ECU file for the New Holland T4 — 3400 99HP, Bosch EDC17C49 controller, software P_826_EDC17_671.hex. Unmodified factory read, usually within 3 hours after we confirm your ECU numbers.
Identification
| Vehicle | New Holland T4 |
|---|---|
| Engine | 3400 99HP |
| ECU | Bosch EDC17C49 |
| Software number | P_826_EDC17_671.hex |
Compatibility
The same Bosch EDC17C49 with part number P_826_EDC17_671.hex is also fitted to these vehicles / engines in our archive:
| Vehicle | Engine | Software |
|---|---|---|
| New Holland T4 (this page) | 3400 99HP | P_826_EDC17_671.hex |
| New Holland T5 | 3400 115HP | P_826_EDC17_671.hex |
| New Holland T5 | 3400 99HP · F5C | P_826_EDC17_671.hex |
| New Holland T5 | 3400 115HP · CANA | P_826_EDC17_671.hex |
Cross references
Other hardware carrying software P_826_EDC17_671.hex:
What you get
A full, unmodified read of the Bosch EDC17C49 as it left the factory — the binary file produced by the original reading tool, no checksum or map changes. Use it to restore a stock calibration after a failed flash or a bad tune, or as the reference file for a tuning job. 15 reads are stored for this identification; you receive the one matching your ECU identification.
| Archive reference | Driver | Damos / A2L |
|---|---|---|
| N34_A352 | N34_A352 | P_826671 |
| N34_F1B9 | N34_F1B9 | P_826671 |
| NEW_01AA | NEW_01AA | P_826671 |
| NEW_2172 | NEW_2172 | P_826671 |
| NEW_A71A | NEW_A71A | P_826671 |
| NEW_C6E2 | NEW_C6E2 | P_826671 |
| NEWH01AA | NEWH01AA | P_826671 |
| NHT_C8EB | NHT_C8EB | P_826671 |
| NXXX01AA | NXXX01AA | P_826671 |
| NXXX060C | NXXX060C | P_826671 |
| NXXX2180 | NXXX2180 | P_826671 |
| NXXX2B8A | NXXX2B8A | P_826671 |
| NXXX2D6E | NXXX2D6E | P_826671 |
| NXXX2F85 | NXXX2F85 | P_826671 |
| NXXXFCC5 | NXXXFCC5 | P_826671 |
Delivery: released to your account and announced by email usually within 3 hours, within 24 hours on business days, once we confirm the read matches the numbers on this page.
Questions about this file
Is this original file compatible with my New Holland T4?
Compare the software number (P_826_EDC17_671.hex) with the identification your tool reads from the ECU. If your software number differs, tell us — we check whether a matching original exists. Bosch EDC17 controllers are identified by a 0281 hardware number and a 1037 software number. Many EDC17 variants on trucks are read in boot/bench mode rather than OBD, so make sure the tool identification matches these numbers before flashing.
What exactly do I receive when I buy the Bosch EDC17C49 original for €25?
An unmodified factory read of the Bosch EDC17C49 (SW P_826_EDC17_671.hex) as stored in our archive — a binary file in the format produced by the original reading tool, chosen among the 15 reads listed on this page after we match your identification. No modifications, no checksum changes: it is meant to restore the ECU to its stock calibration or to serve as a reference for a tuning job.
How and when is the file delivered?
After payment we confirm the read matches the numbers on this page and release it to your account, with an email notification — usually within 3 hours, within 24 hours on business days. If your ECU reports different numbers, tell us with the order and we look for the right file before delivering anything.
Can you also tune this Bosch EDC17C49 or remove EGR / AdBlue / DPF?
Yes — upload your own read through the tuning service and choose the modifications; every tuning job is quoted individually before you pay. The original on this page is useful as a backup before any modification is flashed.