Bosch EDC16C39 ECU — New Holland T6
Original (stock) ECU file for the New Holland T6 — 4500 120HP, Bosch EDC16C39 controller. Unmodified factory read, usually within 3 hours after we confirm your ECU numbers.
Identification
| Vehicle | New Holland T6 |
|---|---|
| Engine | 4500 120HP |
| ECU | Bosch EDC16C39 |
| Numbers | Not recorded for this read — send us the identification from your tool and we match it manually. |
Compatibility
In our archive this exact read is recorded for the New Holland T6 with the 4500 120HP engine. We hold 10 other reads for this model — see “Related files” below. The Bosch EDC16C39 controller appears 17 times across the catalogue.
What you get
A full, unmodified read of the Bosch EDC16C39 as it left the factory — the binary file produced by the original reading tool, no checksum or map changes. Use it to restore a stock calibration after a failed flash or a bad tune, or as the reference file for a tuning job. 16 reads are stored for this identification; you receive the one matching your ECU identification.
| Archive reference | Driver | Damos / A2L |
|---|---|---|
| N45_7595 | N45_7595 | — |
| N60_C450 | N60_C450 | — |
| N67_3CFC | N67_3CFC | — |
| N67_7694 | N67_7694 | — |
| N67_8BB1 | N67_8BB1 | — |
| N67_AD67 | N67_AD67 | — |
| N67_C351 | N67_C351 | — |
| N67_C450 | N67_C450 | — |
| N67_E25D | N67_E25D | — |
| N68_8BB1 | N68_8BB1 | — |
| NEW_77B1 | NEW_77B1 | — |
| NEW_9BFE | NEW_9BFE | — |
| NEW_BC2E | NEW_BC2E | — |
| NHT_8AB0 | NHT_8AB0 | — |
| NXXX8AB0 | NXXX8AB0 | — |
| NXXXB788 | NXXXB788 | — |
Delivery: released to your account and announced by email usually within 3 hours, within 24 hours on business days, once we confirm the read matches the numbers on this page.
Questions about this file
Is this original file compatible with my New Holland T6?
Read the ECU identification with your tool (hardware and software numbers) and send it to us with the order; we confirm the exact original before delivery. Identify the controller by the hardware and software numbers printed on its label or reported by your reading tool.
What exactly do I receive when I buy the Bosch EDC16C39 original for €25?
An unmodified factory read of the Bosch EDC16C39 (identified on this page) as stored in our archive — a binary file in the format produced by the original reading tool, chosen among the 16 reads listed on this page after we match your identification. No modifications, no checksum changes: it is meant to restore the ECU to its stock calibration or to serve as a reference for a tuning job.
How and when is the file delivered?
After payment we confirm the read matches the numbers on this page and release it to your account, with an email notification — usually within 3 hours, within 24 hours on business days. If your ECU reports different numbers, tell us with the order and we look for the right file before delivering anything.
Can you also tune this Bosch EDC16C39 or remove EGR / AdBlue / DPF?
Yes — upload your own read through the tuning service and choose the modifications; every tuning job is quoted individually before you pay. The original on this page is useful as a backup before any modification is flashed.