1037383612 — Bosch EDC16C31 ECU, Mitsubishi Fuso CANTER
Original (stock) ECU file for the Mitsubishi Fuso CANTER — 5000 155HP, Bosch EDC16C31 controller, software 1037383612. Unmodified factory read, usually within 3 hours after we confirm your ECU numbers.
Identification
| Vehicle | Mitsubishi Fuso CANTER |
|---|---|
| Engine | 5000 155HP |
| ECU | Bosch EDC16C31 |
| Software number | 1037383612 |
| Software upgrade | 1037383612 |
| Calibration | 1037383612 |
Compatibility
The same Bosch EDC16C31 with part number 1037383612 is also fitted to these vehicles / engines in our archive:
| Vehicle | Engine | Software |
|---|---|---|
| Mitsubishi Fuso CANTER (this page) | 5000 155HP | 1037383612 |
| Mitsubishi Fuso CANTER | 5000 155HP | 1037383612 |
| Mitsubishi Fuso CANTER | 5000 155HP | 1037383612 |
Cross references
Other hardware carrying software 1037383612:
What you get
A full, unmodified read of the Bosch EDC16C31 as it left the factory — the binary file produced by the original reading tool, no checksum or map changes. Use it to restore a stock calibration after a failed flash or a bad tune, or as the reference file for a tuning job. One read is stored for this identification.
| Archive reference | Driver | Damos / A2L |
|---|---|---|
| MXXXBA62 | MXXXBA62 | P308V673 |
Delivery: released to your account and announced by email usually within 3 hours, within 24 hours on business days, once we confirm the read matches the numbers on this page.
Questions about this file
Is this original file compatible with my Mitsubishi Fuso CANTER?
Compare the software number (1037383612) with the identification your tool reads from the ECU. If your software number differs, tell us — we check whether a matching original exists. Identify the controller by the hardware and software numbers printed on its label or reported by your reading tool.
What exactly do I receive when I buy the Bosch EDC16C31 original for €25?
An unmodified factory read of the Bosch EDC16C31 (SW 1037383612, upgrade 1037383612) as stored in our archive — a binary file in the format produced by the original reading tool. No modifications, no checksum changes: it is meant to restore the ECU to its stock calibration or to serve as a reference for a tuning job.
How and when is the file delivered?
After payment we confirm the read matches the numbers on this page and release it to your account, with an email notification — usually within 3 hours, within 24 hours on business days. If your ECU reports different numbers, tell us with the order and we look for the right file before delivering anything.
Can you also tune this Bosch EDC16C31 or remove EGR / AdBlue / DPF?
Yes — upload your own read through the tuning service and choose the modifications; every tuning job is quoted individually before you pay. The original on this page is useful as a backup before any modification is flashed.