0281001322 — Bosch ECU, Scania G144
Original (stock) ECU file for the Scania G144 — 530HP, Bosch controller, hardware 0281001322, software 1037359350. Unmodified factory read, usually within 3 hours after we confirm your ECU numbers.
Identification
| Vehicle | Scania G144 |
|---|---|
| Engine | 530HP |
| ECU | Bosch |
| Hardware number | 0281001322 |
| Software number | 1037359350 |
Compatibility
The same Bosch with part number 0281001322 is also fitted to these vehicles / engines in our archive:
| Vehicle | Engine | Software |
|---|---|---|
| Scania G144 (this page) | 530HP | 1037359350 |
| Scania R124 | 11700 400HP | — |
Cross references
Other software levels recorded on hardware 0281001322:
What you get
A full, unmodified read of the Bosch as it left the factory — the binary file produced by the original reading tool, no checksum or map changes. Use it to restore a stock calibration after a failed flash or a bad tune, or as the reference file for a tuning job. 2 reads are stored for this identification; you receive the one matching your ECU identification.
| Archive reference | Driver | Damos / A2L |
|---|---|---|
| S322_350 | S322_350 | — |
| S3221F15 | S3221F15 | — |
Delivery: released to your account and announced by email usually within 3 hours, within 24 hours on business days, once we confirm the read matches the numbers on this page.
Questions about this file
Is this original file compatible with my Scania G144?
Compare the hardware number (0281001322) and the software number (1037359350) with the identification your tool reads from the ECU. The software number must match; a different hardware revision usually means a different file. Identify the controller by the hardware and software numbers printed on its label or reported by your reading tool.
What exactly do I receive when I buy the Bosch original for €25?
An unmodified factory read of the Bosch (HW 0281001322, SW 1037359350) as stored in our archive — a binary file in the format produced by the original reading tool, chosen among the 2 reads listed on this page after we match your identification. No modifications, no checksum changes: it is meant to restore the ECU to its stock calibration or to serve as a reference for a tuning job.
How and when is the file delivered?
After payment we confirm the read matches the numbers on this page and release it to your account, with an email notification — usually within 3 hours, within 24 hours on business days. If your ECU reports different numbers, tell us with the order and we look for the right file before delivering anything.
Can you also tune this Bosch or remove EGR / AdBlue / DPF?
Yes — upload your own read through the tuning service and choose the modifications; every tuning job is quoted individually before you pay. The original on this page is useful as a backup before any modification is flashed.